Elicopter T-Rex 450 Pro DFC, kit super combo, Align (#AKX015087T)

Features:
- Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed.
- New removable main shaft block and servo mounting block to simplify main shaft and servo maintenance.
- Integrated battery and ESC mounting platform, with adjusted battery position to achieve the most optimal CG position of the helicopter.
- Vertical rudder servo mount design for closer CG, increasing the sportiness of 3D flights.
- New improved frame side plates with dedicated 3GX mounting location, to simplify wire management and overall aesthetics.
- New style gyro mounting platform with added length.
- Highly rigid and lightweight carbon side plates.
- New style dual point supported tail control assembly for slop free tail, improving on rudder resolution and control precision.
- Unique anti-centripetal force weight tail blade grips to improve rudder locking effect.
- Equipped with Align's brand new MX series high efficiency brushless motor.
- Highly efficient torque tube tail drive design, dramatically reduce power loss found on belt driven system.
- Streamlined design canopy.

Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.

Instructions (3GX Programmable Flybarless System):
- Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
- 3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
- Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
- Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
- Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
- With 3GX's built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.
- Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
- 3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
- Suitable for helicopter of all class from 250 to 800, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
- 3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
- With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
- 3GX's rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
- Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home.

Specifications (3GX Programmable Flybarless System):
Operating Temperature: -10~60 degree
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size: 36.5x25.2x15.6 mm
Weight: 11g
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Built in governor function
Maximum working voltage: 8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without the use of a PC
Compatible with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type recognization

In acest kit super combo elicopterul se livreaza cu pale de carbon 3G, motor BL 450MX, regulator RCE-BL35P, unitate flybarless 3GX si 3 x servo DS415M si 1 x servo DS520 digitale.
Kitul contine instructiuni de asamblare detaliate, cu multe desene si explicatii. Piesele sunt impachetate grupat, codificate dupa fazele de lucru, cea ce face identificarea lor si asamblarea mai simpla chiar si pentru cei cu mai putina experienta.

Specificatii:
Diametru rotor principal: 710 mm
Lungime pale principale: 325 mm
Diametru rotor anticuplu: 158 mm
Inaltime: 204 mm
Lungime: 640 mm
Motor: Brushless Outrunner 450MX
Pinion motor: 12T
Pinion principal: 121T
Pinion autorotatie: 106T
Pinion rotor coada:25T
Raport transmisie: 1:10.08:4.24
Greutate kit: 513g
Greutate RTF aprox 638g

Continutul kitului:
T-REX 450 Pro DFC Kit Super Combo x 1
Pale rotor carbon 325 x 1
BLESC RCE-BL35P 35A Govener Mode x 1
Motor BL 450MX x 1
Servo digital MG DS415M (Metal Gear) x 3
3GX flybarless system x 1
Servo coada DS520 digital x 1

Pentru a rula modelul mai trebuie:
Sistem RC min 6 canale cu functie eCCPM (emitator si receptor)
Acumulator LiPo 2200 mAh

La cererea cumparatorilor livram elicopterele asamblate, echipate si reglate pentru zbor




ATENTIE! Acest elicopter nu este o jucarie pentru copii! Nu este recomandat pentru minori sub 14 ani, decat sub supravegherea unor adulti! Avand piese in miscare de rotatie la turatie inalta, poate ranii grav persoanele aflate in apropiere. Fabricantul si vanzatorul modelului nu sunt responsabili pentru daune cauzate de utilizarea necorespunzatoare a acestuia.