• Categorii

image: Regulator BL FLY-PRO 60A Mărește

Regulator BL FLY-PRO 60A (#FLY60PRO)

#FLY60PRO

Nou

Regulator BL FLY-PRO 60A

Mai multe detalii

2 Produse

În stoc

195,00 lei

195,00 lei per nr

● Super fine and smooth touch of speed controlling, first-rate accurate linearity and quick-respond speed of throttle.
● Separate voltage regulator IC for MCU(Micro Controller Unit), high capability of anti-interference to decrease the possibility out of control.
● Low-voltage cut-off protection of battery, blocked rotation protection and throttle signal lose protection, etc. All these functions can prolong the service life of ESC effectively.
● It can be compatible with a programming card(optional component), which has a simple and visual surface so as to change the parameters conveniently at any time anywhere (reference to the manaul for programming card).
● Good and safe performance of power-on. The motor won’t be started no matter which position the throttle stick is on when the battery is connected.
● All the ESCs of the series can be attached to battery of Li-XX or Fe. The protection voltage becomes more accurate.
● Automatically adjustment of Timing recommended for outrunner and inrunner motors.
● Direction of motor rotation can be changed by transmitter or programming card.
● BEC has adopted the most advanced designing of Switch mode mastered by the main-controlling chip, combining of FET of extremely low resistor against high frequency, current limit protection, high efficiency of chip up to 93%, which can meet the demand of digital servo of high torque or simulating servo fully.

Specificatii
Greutate: 53g cu cabluri
Dimensiuni: 70 x 26 x 16 mm
Curent constant: 60A
Current maxim: 70A (10 secunde)
Alimentare: 2-6 celule LiPo sau 6-16 NiMH
Detectarea automata al tipului bateriei si al numarului de celule
BEC: 5.5V, 6A
PWM: 8 kHz
Timing: programabil: hard/soft
Frana: programabil: ON/OFF
LV CUT OFF brusc sau treptat, in fuctie de starea programata a franei

Pentru programarea avansata a acestui regulator puteti utiliza cardul de programare FLY-PRO.

Aici puteti citii instructiunile de utilizare al regulatorului de turatie FLY-PRO BLMC de la HiModel .

ATENTIE: Scurtcircuitarea iesirilor regulatorului intre ele sau spre nul cauzeaza defectarea instantanee a acestuia. De asemenea, depasirea valorilor curentilor maxim de iesire sau de BEC duce la defectarea regulatorului. Asigurati racirea regulatorului in timpul functionarii prin dirijarea unui flux de aer catre acesta!